EnemaEquipment.com
Privately Delivering Enema Equipment since 1998. Phone: 1-800-809-0610 9-5 M-F ESTA Continuous Use- IN/OUT Enema Nozzle
Product Description
This IN/OUT Enema tip can be used repeatedly to administer and evacuate a series of enemas all at one time. The combination of nozzles, valves and an evacuation hose allow you to leave the plug/nozzle in place while you give or received a number of enemas.
The nozzle starts out at 0.75" wide, graduates up to 1.4", and then drops back down to 0.75". It is 5.85" long.
The small tube has an inside diameter of 0.3" and is 36" long. The larger evacuation tube has an inside diameter of 0.63" and is 77" long. Compatible with all of our larger-than-2-quart enema bags.
How To Use The In and Out Enema Nozzle - This product doesn't come with instructions, so we have to provide some right here.
1. Purpose: The purpose of the In and Out Enema Nozzle is so that you can administer more than one cleansing cycle without removing and reinserting the enema nozzle each time. To do this, the nozzle comes attached to two different hoses, a thinner one to supply fresh enema solution from your enema bag or bucket and a thicker one to handle the evacuated waste.
2. Set-Up: To set up the In and Out Enema nozzle you will need the nozzle set, an enema bag set (like our gallon set) some enema solution, and someplace to send the waste (like the toilet). Also, some personal lubricant is a very good idea as the enema nozzle is not small. Set up the In and Out Nozzle by attaching the thin tube to your enema bag (use the clamp from your enema bag set on this tube). Then place the open end of the large tube in your waste receptacle. Close the clamp on the large tube and close the clamp on the small tube. Fill the enema bag (or bucket) with your solution of choice.
3. To Administer: To administer an enema, insert the nozzle, then open the clamp on the small tube to start the flow. When enough flow has been administered, close the clamp on the small tube.
4. To Evacuate: Be sure the open end of the large tube is in your waste receptacle, then open the clamp on the large tube and waste will evacuate. After evacuation is complete, close the large clamp. To administer another cycle, repeat steps 3 and 4. When complete, remove the nozzle, clean thoroughly, drain and allow to air dry completely.
The nozzle starts out at 0.75" wide, graduates up to 1.4", and then drops back down to 0.75". It is 5.85" long.
The small tube has an inside diameter of 0.3" and is 36" long. The larger evacuation tube has an inside diameter of 0.63" and is 77" long. Compatible with all of our larger-than-2-quart enema bags.
How To Use The In and Out Enema Nozzle - This product doesn't come with instructions, so we have to provide some right here.
1. Purpose: The purpose of the In and Out Enema Nozzle is so that you can administer more than one cleansing cycle without removing and reinserting the enema nozzle each time. To do this, the nozzle comes attached to two different hoses, a thinner one to supply fresh enema solution from your enema bag or bucket and a thicker one to handle the evacuated waste.
2. Set-Up: To set up the In and Out Enema nozzle you will need the nozzle set, an enema bag set (like our gallon set) some enema solution, and someplace to send the waste (like the toilet). Also, some personal lubricant is a very good idea as the enema nozzle is not small. Set up the In and Out Nozzle by attaching the thin tube to your enema bag (use the clamp from your enema bag set on this tube). Then place the open end of the large tube in your waste receptacle. Close the clamp on the large tube and close the clamp on the small tube. Fill the enema bag (or bucket) with your solution of choice.
3. To Administer: To administer an enema, insert the nozzle, then open the clamp on the small tube to start the flow. When enough flow has been administered, close the clamp on the small tube.
4. To Evacuate: Be sure the open end of the large tube is in your waste receptacle, then open the clamp on the large tube and waste will evacuate. After evacuation is complete, close the large clamp. To administer another cycle, repeat steps 3 and 4. When complete, remove the nozzle, clean thoroughly, drain and allow to air dry completely.
 |
 |
 |
 |
